heat treatment
美 
英
英汉解释
例句
However, they usually require heat treatment to produce a surface hard enough to give satisfactory resistance to wear.
然而，它们通常需要经过热处理，以生成表面的硬化层来达到足够的耐磨性。
Steel for carburizing is usually a low-carbon steel of about 0. 15% carbon that would not in itself responds appreciably to heat treatment.
用于渗碳的一般是含碳量约为0.15%、本身不太适合热处理的低碳钢。
The heat treatment regimes of the alloy are constituted by means of the DTA curve analysis and a trial and error method.
通过差热曲线分析及尝试法，制定出合金的热处理工艺。
Test shows that the depth of residual compressive after chemical heat treatment is correspondent with that of diffusion layer.
试验表明，化学热处理后残余压应力的深度往往与渗层深度相一致。
Results showed that the corrosion resistance of coating being heat-treated was prefer to that of without heat treatment.
结果表明，高温热处理后的镀层耐蚀性优于镀态。
Experiment results show that removing the surface broken crystal layer of the cold drawn rod can prevent heat treatment induced cracks.
实验结果表明，热处理前去掉冷拉棒表面的碎晶层可以防止它在热处理过程中产生裂纹。
The results showed that the temperature and time of the heat treatment had different effect on the protein fractions.
结果表明，热处理温度和时间对样品中的蛋白质组分均有不同程度的影响。
The following discussion applies principally to the heat treatment of ordinary commercial steels known as plain carbon steels.
下列讨论主要针对被称为普通碳钢的工业用钢而言。
The crane for quenching , possess the peculiarity of speedy descent , is usually applied in heat treatment .
淬火起重机具有高速下降特性，常用作为热处理工艺装备。
The influence of heat treatment on the surface morphology and corrosion-resistance of Ni-P alloy coating was studied in this paper.
研究了热处理对镍磷合金镀层的表面形貌和耐腐蚀性的影响。
The company has forging factory, casting factory, marine hardware factory, machining center and professional heat treatment center.
公司下属铸造厂、锻造厂和索具厂，数控机加工中心和专业的热处理中心。
Heat treatment process has no effect on the propagation mode of thermal fatigue crack and the shape of crack at the sample notch.
热处理工艺对裂纹在试样缺口处的形态及裂纹的传播方式无影响。
embedding the target in the iron container filled with the fine iron sand; and carrying out the heat treatment of the target.
将所述靶材埋入装有细铁砂的铁质容器中，对所述靶材进行热处理。
C and by all the pipe by heat treatment should be one of the hardness testing, and provide corresponding hardness report.
所有经热处理的管件应逐件进行硬度检测，并提供相应硬度报告。
Massage instrument that introduces the principle of the heat treatment to lessen stress , relieve fatigue , ease tension and relax muscles .
本按摩器械是采用热疗原理起到减轻压力，减轻疲劳，缓解紧张，放松肌肉的作用。
After heat treatment, particles of the films uniformly refined and orderly, the surface of thin films become smooth.
热处理后薄膜的颗粒均匀细化，并呈现有序化，薄膜表面光滑。
The heat treatment of metal is process which put the metal in some medium and heat to a fit temperature, and keep some time then cool down .
金属热处理是将金属工件放在一定的介质中加热到适宜的温度，并在此温度中保持一定时间后，又以不同速度冷却的一种工艺。
the heat treatment process, microstructure and properties of the free-cutting plastic die steelP20SRE have been investigated.
研究了P20SRE易切削塑料模具钢的热处理工艺、组织与性能。
The heat treatment furnace comprises the heating furnace and a quenching device.
热处理炉包括所述加热炉，还包括淬火装置。
The maximum operating temperature is directly related to the heat treatment process used in manufacturing components.
最高工作温度与制造元件所用的热处理工艺直接有关。
Heat treatment is a method by which the heat treater can change the physical properties of metal.
热处理是热理人员借以改变金属物理性能的一种方法。
Differential rates resulting from temperature gradients in the material introduce stresses which can't be removed by later heat treatment.
由材料内部的温度梯度引起的速度差将导致产生应力，这种应力是无法用以后的热处理来消除的。
A new technology of heat treatment has been approached for increasing the toughness and working life of the files made of T12A steel.
试验探索了一种提高T12A钢制性刀韧性及使用寿命的热处理工艺。
The welding (heat treatment )of pipes have been carried out with incorporated programming.
管子的焊接（热处理）现已按照编写的程序完成。
The invention relates to a heating equipment for preliminary heat treatment in oxidizing and carbonizing fibre and its working process.
本发明涉及对预氧化纤维碳化加工中，加热装置和加工工艺的改进。
formed as glasses and then converted into a crystalline ceramic by a subsequent heat treatment.
形成了眼镜，然后转换成结晶陶瓷后续热处理。
However, either as-cast state or heat treatment state, the plasticity of the alloy at the room temperature has no significant improvement.
但是，无论是铸态还是热处理状态，试验合金的室温塑性没有发生明显的提高；
The heat treatment process and effects of the nucleation agent on the nucleation and crystallization were explored.
探讨了微晶玻璃的热处理工艺制度及晶核剂对核化、晶化的影响。
post weld heat treatment and the surface lubrication after removing welding scar.
阐明了焊接质量主要受焊接工艺、焊后热处理、去疤后的表面润滑影响。
The improvement in the heat treatment technology of the stamping die for the silicon steel sheet was introduced.
介绍了硅钢片冲模热处理工艺的改进。
and a heat treatment step in which the substrate (1) is heated in an atmosphere containing substantially no oxygen and hydrogen.
在镀敷处理工序后，将基材1在实质上不含有氧和氢的气氛中加热的热处理工序。
The flowchart with its performance, quality control measure and heat treatment process were investigated for DNV rigid multi-joint tie.
研究了DNV多节刚性拉杆的生产工艺流程及其实施过程、质量控制方法和热处理工艺。
"New" gear, screw - using high quality materials, after high-frequency heat treatment, increase the service life of the machine.
新型齿轮、螺杆——选用优质材料，经过高频热处理，增加机器使用寿命。
Featured with reliable performance and ease operation, this system has met the demands of the heat-treatment line and p. . .
此套控制系统操作简便、可靠、满足热处理工艺要求，对提高产品质量和产量发挥了重要作用。
The heat treatment process and microstructure of the steel was also introduced.
介绍了该钢循环热处理规范和所得组织。
Once the recrystallization stopped, microstructure would not change during further heat treatment time.
再结晶过程结束后，继续延长热处理时间，晶粒组织不发生明显的变化。
Restoration heat treatment is a part of the restoration engineering and its development should relay on the theory and principle of RCM.
该技术属于修复工程学的一部分，应该按照以可靠性为中心（RCM）的理论和原则发展这一技术。
The paper suggests that after suitable heat treatment, DH-MQ steel has excellent high-tough-matching, to be an ideal material for drill bit.
提出在经过合适的热处理工艺后，DH-MQ钢具有极佳的强韧性配合，是钻头材料的理想选择。
on a simplified impulse response model, a predictive temperature control system for a heat treatment resistance furnace is designed.
基于过阻尼过程的简化脉冲响应模型，设计了热处理电阻炉温度的预测控制系统。
Too low content of pearlite after heat treatment was the main reason causing the K-9cranks to be rejected.
9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。
As a supplementary measure, heat treatment is now used in some fruits and vegetables storage practice.
作为一项辅助措施，热处理已开始在一些果蔬的贮藏实践中得到应用。
Please give the standards of the preheat before welding and those of the heat-treatment after welding.
请您提供焊前预热和焊后预热处理的规范。
